Condenser Gooseneck Microphone with 5-Pin Desk Stand Power Module
ES925/DS5
ES925/DS5
Overview
ES925/DS5
The ES925/DS5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a condenser microphone element, gooseneck, and a desk stand power module.
Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (4.85", 9.08", 12.08", 15.08", 18.08", 21.08"), and microphone polar patterns (MicroLine®, hypercardioid, cardioid, omnidirectional).
+10
Features
- Modular microphone system includes a microphone element, gooseneck and power module - each interchangeable with components from other ES Modular Microphones
- Desk stand and element housing both feature a highly visible, two-state RGB LED status indicator
- Logic I/O capability permits control of remote devices from the desk stand's touch-sensitive capacitive-type user switch
- Capacitive touch switch can be set to any one of three operating modes: "touch-on/touch-off", "touch-to-talk" and "touch-to-mute"
- Designed for professional sound reinforcement and other commercial sound applications
- Interchangeable condenser microphone elements provide full-range, natural sound
- Heavy die-cast construction and no-slip bottom pads minimize coupling of surface vibration to the microphone
- Local/remote switching operation enables independent microphone audio and control output
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Includes foam windscreen
- Available in six lengths
Specifications
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Frequency Response | 30-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Open Circuit Sensitivity | -40 dB (10.0 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 140 dB SPL |
| Dynamic Range | 112 dB |
| Signal-to-Noise Ratio | 66 dB |
| Phantom Power Requirements | 22-52V DC |
| Switches | Activation: on/off; LED Color: mic on, mic off; Switch function: touch on/off, momentary on, momentary off; Control: local, remote, LED remote; Flat, roll-off |
| Current Consumption | 8 mA |
| Weight | ES925C6/DS5: 674 g (23.8 oz) ES925C12/DS5: 698 g (24.6 oz) ES925C15/DS5: 703 g (24.8 oz) ES925C18/DS5: 708 g (25.0 oz) ES925C21/DS5: 713 g (25.2 oz) ES925C24/DS5: 718 g (25.3 oz) |
| Dimensions | ES925C6/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 150.6 mm (5.93") H ES925C12/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 258.0 mm (10.16") H ES925C15/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 334.2 mm (13.16") H ES925C18/DS5: 97.0 mm |
| Output Connector | TB5M-type |
| Optional Interchangeable Elements | ESE-Ca cardioid (120°), ESE-Ha hypercardioid (100°), ESE-MLa MicroLine® (90°), ESE-Oa omnidirectional (360°) |
| Accessories Included | 7.6 m (24.9') microphone cable (TA5F, unterminated); AT8109a foam windscreen; set screw (M2 x 2); hex wrench |
| Audio-Technica Case Style | M44 |
Downloads
ES925 with DS5 Quick Start Guide
ES925C with DS5 User Manual