ATM710

The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Microphones
Element	Fixed-charge back plate permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	40 - 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-40 dB (10.0 mV) re 1V at 1 Pa
Maximum Input Sound Level	148 dB SPL, 1 kHz at 1% T.H.D. 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range	127 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	73 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.5 mA typical
Weight	274g
Dimensions	179.0 mm (7.05") long, 50.0 mm (1.97") diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch