Cardioid Condenser Boundary Microphone
ES947
ES947
Features
The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.
This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: black (ES947) and white (ES947W).
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Half-cardioid (Cardioid in hemisphere above mounting surface) |
Frequency Response | 40 - 12,000 Hz |
Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 142 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 113 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Weight | 64 g (2.3 oz) |
Dimensions | 69.0 mm (2.72") long, 30.0 mm (1.18") diameter |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | One pair isolators |
Downloads
ES947 Frequency Response
ES947 Polar Pattern
ES947 Specification Sheet