Dual Moving Coil Cartridge
AT-MONO3/SP
AT-MONO3/SP
Features
- Dual moving coil cartridge designed specifically for use with 78 RPM shellac records*
- Aluminum cantilever with 2.5 mil conical stylus
- Strong, rigid body construction of die-cast aluminum alloy and synthetic resin
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- Compatible with stereo playback systems
Specifications
Cartridge & Stylus | |
---|---|
Frequency Response | 20-15,000 Hz |
Vertical Tracking Angle | 23° |
Vertical Tracking Force | 3.0-7.0 g (5.0 g standard) |
Stylus Construction | Nude Square Shank |
Recommended Load Impedance | 400-47,000 ohms* |
Coil Impedance | 40 ohms (1 kHz) |
DC Resistance | 40 ohms |
Coil Inductance | 190 µH (1 kHz) |
Output Voltage | 1.2 mV (at 1 kHz, 12 cm/sec) |
Stylus Shape | 2.5 mil conical |
Cantilever | Aluminum pipe |
Static Compliance | 10 x 10-6 cm/dyne |
Dynamic Compliance | 3.5 x 10-6 cm/dyne (100 Hz) |
Mounting | Half-inch |
Dimensions | 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D |
Accessories Included | Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm × 2, 20 mm × 2); plastic protector; brush; PCOCC lead wire set |
Body Material | Aluminium/Synthetic Resin |
Mounting Feature | Half-inch mount |
Stylus Size | Bonded round shank |
Type | Horizontal Mono Moving Coil |
Weight | 6.8 g (0.24 oz) |
Notes | Note: Stylus assembly is not field-replaceable. * When connected to the MC input of a transformer-less phono pre-amp, choose a lower gain position due to the high output voltage (1.2 mV). |