Cardioid Condenser Boundary Microphone with Dante™ Network Output
ATND971a
ATND971a
Features
- A digital Ethernet mic with Dante capabilities – an Audio-Technica innovation
- Connects directly to network via Ethernet cable – no need for expensive audio cable or soldering
- Integrated switch allows mic to communicate with – and control – other Dante-enabled devices within a network
- Local or remote control of mic gain, low-cut filter and LED indicator
- Red/Green LED indicator
- UniGuard® RFI-shielding technology; UniSteep® filter
- Powered by network PoE
- Scalable across Dante’s 512 bidirectional audio channels
- Plug-and-play compatibility with AES67 networks, including those that utilize Livewire, RAVENNA and Q-LAN AoIP technologies
- Increases Dante Domain Manager features, adding role-based security, cross-subnet routing, SNMP alerts and more
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
Frequency Response | 30-20,000 Hz |
Low Frequency Roll Off | 80 Hz, 18 dB/octave |
Maximum Input Sound Level | 117 dB SPL, 1 kHz at 1% T.H.D. |
Signal-to-Noise Ratio | 68 dB, 1 kHz at 1 Pa |
Power Requirements | PoE IEEE802.3af standard (Power consumption 1.5W) |
Switches | Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB Remote Mode: Low-cut and Gain via third-party software* |
Switch Logic | Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB Remote M |
Weight (Microphone) | 393 g (13.8 oz) |
Weight | 393 g |
Dimensions | 110.0 mm (4.33") maximum length, 89.5 mm (3.52") maximum width, 35.8 mm (1.41") maximum height |
Output Connector | RJ45 |
Optional Interchangeable Elements | UE-O omnidirectional (360°) UE-H hypercardioid (100°) |
Accessories Included | Soft protective pouch |
Notes | Dante Network Specifications Physical level: standard Ethernet Connector: single RJ45 Cable quality: Shielded CAT5 or CAT6 recommended Transmission speed: 100 Mbps |
Downloads
ATND971a Submittal Sheet
ATND971a Specification Sheet
ATND971 FCC DOC
ATND971 Firmware v4.0.10.2
ATND971a Firmware v4.1.4.2