DJ Cartridge
AT-XP3
€59.00
AT-XP3
Overview
AT-XP3
The AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
Features
The AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
Specifications
| Cartridge & Stylus | |
|---|---|
| Frequency Response | 20 to 18,000 Hz |
| Channel Separation | 20 dB (1 kHz) |
| Vertical Tracking Angle | 20 degrees |
| Vertical Tracking Force | 2.0 to 4.0 g (standard 3g) |
| Stylus Construction | Bonded Round Shank |
| Recommended Load Impedance | 47,000 Ω |
| Coil Impedance | 6,700 ohms (1 kHz) |
| Coil Inductance | 550 mH (1 kHz) |
| Output Voltage | 5.5 mV (at 1 kHz, 5 cm/sec) |
| Output Channel Balance | 2.0 dB (1 kHz) |
| Stylus Shape | Conical |
| Cantilever | Carbon reinforced ABS |
| Static Compliance | 20 x 10 – 6 cm / dyne |
| Dynamic Compliance | 6.0 x 10 – 6 cm / dyne (100 Hz) |
| Mounting | Half-inch |
| Cartridge Weight | 6.2g |
| Dimensions | 17.2 x 17.8 x 28.3 ( H x W x D mm) |
| Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers Two Nut Non-magnetic screwdriver |
| Model | AT-XP3 |
| Recommended Load Capacitance | 100-200 pF |
| Replacement Stylus | ATN-XP3 |
| Stylus Size | 0.6 mil |
Reviews
Downloads
AT-XP3 User Manual (Multi-lang)