ES905CL

The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI. The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.

Microphones
Element	Fixed-charge back plate permanently polarised condenser
Polar Pattern	Cardioid
Frequency Response	60 - 20,000 Hz
Low Frequency Roll Off	80 Hz, 18 dB/octave
Open Circuit Sensitivity	-38 dB (12.5 mV) re 1V at 1 Pa
Maximum Input Sound Level	138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	111 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	67 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA typical
Weight	Microphone: 330 g (11.6 oz) Power Module : 81 g (2.9 oz)
Cable	2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
Dimensions	Microphone : 523.4 mm (20.61") long - 24.6 mm (0.97") head diameter Power Module : 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Output Connector	Integral 3-pin XLRM-type (Power module)
Accessories Included	AT8538 power module; (3) #8 x 1" black oxide wood screws for microphone mount