Broadcast Stereo Headset
BPHS2C
BPHS2C
+1
Features
- Low-profile, closed-back, on-ear design provides excellent isolation and fit
- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction
- Carefully crafted using key metal components for lasting durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement
Specifications
| Microphone | |
|---|---|
| Element | Back electret condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 60 - 15,000 Hz (@ 2 cm) |
| Open Circuit Sensitivity | –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz) |
| Maximum Input Sound Level | 140 dB SPL (1 kHz THD1%) |
| Dynamic Range | 106 dB (1 kHz at Max S.P.L.) |
| Signal-to-Noise Ratio | 60 dB (1 kHz at 1 Pa, A-weighted) |
| Phantom Power Requirements | 11 - 52V DC, 2 mA |
| Dimensions | Height: 12.7 mm (0.5”), Minimum width: 12 mm (0.47”) |
| Output Connector | TB6M |
| Headphones | |
|---|---|
| Type | Closed-back dynamic |
| Driver Diameter | Φ45 mm (1.77”) |
| Maximum Output | 1,600 mW |
| Impedance | 38Ω (312Ω when limiter switch is on) |
| Weight | 240 g (8.5 oz) without cable |
| Connector | TB6M jack |
| Accessories Included | Windscreen x 3, clip, pouch |