ATM450

One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The microphone’s extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

Microphones
Element	Fixed-charge back plate permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	40 - 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-41 dB (8.9 mV) re 1V at 1 Pa
Maximum Input Sound Level	152 dB SPL, 1 kHz at 1% T.H.D. 162 dB SPL, with 10 dB pad (nominal)
Dynamic Range	127 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	69 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.5 mA typical
Switches	Flat, roll-off; 10 dB pad
Weight	98g
Dimensions	126.9 mm (5.00") long, 21.0 mm (0.83") diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch