Question: How do I change the AF meter on the 3000 Series 4^th Generation receiver?

Answer: The 3000 Series 4^th Generation ATW-R3210 wireless receiver shows the AF (audio level) meter on the right side of the display screen while in the standard view. This meter may display either the transmitter level that is received from the connected 3000 Series transmitter or the receiver audio output level. By default, the receiver is set to display the output level of the receiver. The receiver output level may be controlled via the receiver menu.

Before you begin, please note the following:

• If the procedure times out after an extended period, you may have to restart the process from the beginning.
• To move one step back in the procedure, press the Back button.
• To cancel and return to the home screen, press and hold the Back button.

Control receiver output level

1. With the receiver powered on, press the Control Dial to display the menu.

**Note, the menu bar will appear on the right side of the display.**

2. Turn the Control Dial counterclockwise to scroll down two places to Audio. Press the Control Dial to select Audio.
3. Turn the Control Dial counterclockwise to lower the receiver’s audio output level. The level moves in +/- 2dB increments.

• The default is set to the maximum output level of 0dB.
• The minimum output level is -60dB.

4. Once the desired receiver output level is displayed, press the Control Dial to select it and you will see “Stored” on the display.

Change the AF meter to display the transmitter level

1. With the receiver powered on, press the Control Dial to display the menu.

**Note, the menu bar will appear on the right side of the display.**

2. Turn the Control Dial clockwise to scroll up one place to Utilities. Press the Control Dial to select Utilities.
3. Turn the Control Dial clockwise to scroll up five places to AF Meter. Press the Control Dial to select AF Meter.
4. If necessary, turn the Control Dial to select TX. Press the Control Dial to select TX and you will see “Stored” on the display.

You may also note that in the performance view on the receiver, both the transmitter and receiver levels are displayed simultaneously. This allows you to monitor the gain structure between your transmitter and receiver audio levels.

The gain level may be adjusted in the transmitter menu.

Change transmitter gain level

1. With the transmitter powered on, press the Set button to display the menu.
2. Press the Down button two times to display Gain. Press the Set button to select Gain.
3. Press the Up or Down button to select the desired gain setting. The level moves in +/- 2dB increments.

• Maximum gain setting is +20dB.
• Minimum gain setting is -10dB.

4. Once the desired gain setting is displayed, press the Set button to select it and you will see “Stored” in the display.

If you have further questions on changing the AF meter display as well as making changes to the receiver output level on the receiver or the gain setting on the transmitters, you may contact the Audio Solutions Department for assistance.