Dual Moving Magnet Stereo DJ Cartridge
AT-XP7
179,00 €
AT-XP7
Aperçu
AT-XP7
Dual Moving Magnet Stereo DJ Cartridge
Description
AT-XP7
Dual Moving Magnet Stereo Cartridge
The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
- Durable robust design for high-quality specialist DJ playback
- Cartridges designed for DJ venue applications for their Hi Fi audio Performance
- Great visibility of stylus tip for instant positioning in dark environments
- Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
- VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
- Tapered aluminium cantilever
- Stainless wire suspension enables expressive higher frequency for clearer sound
- High-rigidity and Low-resonance cartridge housing
- Replacement Stylus: ATN-XP7
Plus d'infos
| Cartridge & Stylus | |
|---|---|
| Réponse en Fréquence | 20 - 20,000 Hz |
| Séparation des Canaux | 22 dB at 1kHz |
| Angle de Piste Vertical | 20° |
| Vertical Tracking Force | 2.0 to 4.0 g (standard 3g) |
| Fixation du Diamant | Bonded Round Shank |
| Impédance de Charge Recommandée | 47,000 ohms |
| Inductance de la Bobine | 1.0 H (1 kHz) |
| Tension de Sortie | 6.0 mV (mV at 1 kHz, 5 cm/sec) |
| Equilibre des Canaux en Sortie | Output Channel Balance |
| Type de Diamant | Elliptical |
| Cantilever (levier porte-pointe) | Aluminium tapered Pipe |
| Compliance Statique | 20 x 10-6 cm/dyne |
| Compliance Dynamique | 8.0x10-6cm/dyne (100Hz) |
| Montage | Half-inch |
| Dimensions | H17.2×W17.8×D28.3mm |
| Accessoires Fournis | Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1 |
| Capacité de Charge Recommandée | 100-200 pF |
| Pointe de Lecture de Remplacement | ATN-XP7 |
| Taille du Diamant | 0.3 x 0.7 mil |
| Type de cellule | VM Dual Magnet |
| Poids | 6.2g |
Commentaires
Téléchargements
User Manual (Multi-Lang)